All projects

Project · 2026

RF · Microstrip · VNA

Capacitively Compensated Directional Coupler

A microstrip directional coupler with capacitive compensation, built and VNA-tested as a quasi-circulator experiment for FMCW radar.

Motivation

For an FMCW radar project, I wanted to reuse one antenna for transmit and receive. A directional coupler can act as a quasi-circulator, but a conventional microstrip coupler has poor directivity because its modes propagate at different phase velocities.

Papers on compensated couplers suggested adding capacitance to reduce that mismatch, and I had recently started to etch my own PCBs so I thought might as well try it out and test it.

Simulation

I modeled the network in Qucs and swept the relevant parameters before committing to a physical prototype.

Qucs schematic and response plots for the capacitively compensated directional coupler.

Qucs model and simulated coupler responses.

Prototype

The resulting three-port microstrip structure was fabricated on copper-clad board with added capacitive elements, then measured on a VNA.

Hand-built three-port microstrip directional coupler with SMA connectors.

The compensated coupler prototype used for VNA testing.